Baldor DSM S Series Installation Manual page 15

3.1.2.3 Dimensions - DSMS34
Flying leads
305 (12)
94.7
(3.73)
Motor
Stack
DSMS34F-1B
DSMS34F-2B
DSMS34F-3B
3.1.2.4 Securing DSM cables
Some applications may require that the DSM moves with the axis motion. If this is a
requirement of your application, the motor leads must be properly anchored. Secure the flying
leads to the motor body using adhesive cable clamps. This will prevent flexing and tugging
which can cause damage at critical connection points in the DSM electronics.
Do not bundle the logic leads together with the DSM power leads.
MN1940
2 (0.08)
18.6 (0.73)
31.8 (1.25)
L MAX
L MAX2
All dimensions shown as
Dimensions
(mm / inches)
L
MAX
94.2 (3.71)
114.3 (4.50)
154.2 (6.07)
Figure 4 - Package dimensions - DSMS34
4 x Ø5.5 (0.22)
37 (1.46)
25 (0.98)
13 (0.51)
10 (0.39)
mm (inches)
L
MAX2
(with control knob)
112.3 (4.42)
132.3 (5.21)
172.2 (6.78)
www.baldormotion.com
Ø14
(0.55)
Ø73
(2.87)
69.6 (2.74)
86.1 (3.39)
Weight
kg / lb
1.9 (4.19)
2.5 (5.5)
4.0 (8.8)
Basic Installation 3-5