Interior Motion Sensor - BMW 328i Owner's Manual

Sedan
Hide thumbs Also See for 328i:
Table of Contents

Advertisement

Switching off an alarm
>
Unlock the car with the remote control, refer
to page 29.
>
Insert the remote control all the way into the
ignition lock.
Indicator lamp displays
>
The indicator lamp under the inside rear-
view mirror flashes continuously: the sys-
tem is armed.
>
The indicator lamp flashes after locking:
doors, hood, luggage compartment lid/tail-
gate or rear window are not properly closed.
Even if you do not close the alerted area, the
system begins to monitor the remaining
areas, and the indicator lamp flashes con-
tinuously after approx. 10 seconds. The
interior motion sensor and the tilt alarm
sensor are not activated.
>
The indicator lamp goes out after unlocking:
your vehicle has not been disturbed while
you were away.
>
If the indicator lamp flashes after unlocking
until the remote control is inserted in the
ignition, but for no longer than approx.
5 minutes: your vehicle has been disturbed
while you were away.
Tilt alarm sensor
The tilt of the vehicle is monitored. The alarm
system reacts, e.g. to attempts to steal a wheel
or tow the vehicle.

Interior motion sensor

In order for the interior motion sensor to func-
tion properly, the windows and glass roof must
*
be completely closed
.
36
Online Edition for Part no. 01 41 0 014 254 - © 08/07 BMW AG
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following
situations:
>
In duplex garages
>
During transport on car-carrying trains,
boats/ships or on a trailer
>
When animals are to remain in the vehicle
Switching off tilt alarm sensor and
interior motion sensor
Press the
button on the remote control
again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
Convenient access*
Convenient access enables you to enter your
vehicle without needing to hold the remote con-
trol in your hand. All you need to do is wear the
remote control close to your body, e.g. in your
jacket pocket. The vehicle detects the corre-
sponding remote control within the immediate
vicinity or in the passenger compartment.
Convenient access supports the following
functions:
>
Unlocking/locking the vehicle
>
Unlocking the luggage compartment lid/
tailgate separately
>
Engine starting
>
Convenient closure
Functional requirement
>
The vehicle or the luggage compartment
lid/tailgate can only be locked when the
vehicle detects that the remote control cur-
rently in use is outside of the vehicle.
>
The vehicle cannot be locked or unlocked
again until after approx. 2 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents