Sonic Frontiers SFCD 1 Operating Manual page 11

Remaining Remote
Control Functions
Numeric Keypad*
S
T Program Button*
U A-B Sample Button*
V Time Button*
W Repeat Button*
X Scan Button*
* (on the remote only)
Refer to Reference Diagrams and to Front Panel Control descriptions.
This keypad allows tracks to be selected directly. Punch the desired track number and
then the next function (either PLAY or PROGRAM) to complete the selection.
Tracks selected through the KEYPAD (S) or SKIP (K) buttons may be programmed for
desired playback order by selecting a desired track then pushing the program button. Up
to 20 tracks may be programmed into memory for playback. Tracks may only be pro-
grammed once; attempting to program a track twice will clear the track from memory. To
clear the programmed material from memory, press the STOP (I) button once before pro-
grammed play has begun, or twice consecutively during play.
This button will sample a portion of a track for repeat playback. This function is extreme-
ly useful for musicians. When the A-B button is depressed once during normal playback
of a CD, the SFCD 1 will use that position in the playing track as a starting point of the
sample and A-> will appear in the DISPLAY WINDOW. Press the A-B button a second
time and the SFCD 1 will use this point in the playing track as an ending point. A->B will
appear in the DISPLAY WINDOW and the SFCD 1 will repeat play the sampled selection
between the start and ending points.
This button toggles between the following four time displays. When the unit is first pow-
ered up it displays TIME of the current track (starts at 0:00 at the beginning of each
track). Pressing the button once displays the TOTAL TIME elapsed on the current CD or
programmed selection of tracks (starts at 0:00 at the beginning of the disc). Pressing the
button a second time displays TOTAL REMaining TIME on the current CD or programmed
selection of tracks (counts down to reach 0:00 at the end of the disc). Pressing this button
a third time displays the REMaining TIME of the current track (counts down to reach 0:00
at the end of the track). Pressing this button a fourth time returns it to TIME of the current
track (starts at 0:00 at the beginning of each track).
When depressed once, this button will cause a CD in play mode to repeat the tracks in
the order they appear on the CD or to repeat a programmed selection of tracks in the
order they are programmed. When pressed twice, the Repeat One mode will be activat-
ed, causing the currently selected or playing track to be repeatedly played. Pressing this
button a third time will clear this function.
When depressed, this button will cause the transport to scan the CD. During this scan the
transport will play the first 10 seconds of each track.
9