Baumatic BR22.8A User Manual page 24

o Close the door and ensure that the door seal of the appliance is
not creased or crushed. The door should open and close
smoothly.
o Repeat the above process on the other door of the appliance.
3) Open the doors of the appliance and locate the 3
holes in the fixing bar at the top of the fridge
cabinet and the 2 holes which can be found in the
hinges at the bottom of the freezer cabinet.
o Use a bradawl to make small indentations in
o Fix the three A4 x 12 screws through the h
o Fit the two A4 x 16 screws through the holes
o Ensure that the five screws are fully tightened.
2) Using a drill with a 3 mm drill bit,
drill out the screw holes that you have
just marked.
o Screw each slide to the furniture
door using the A4 x 12 screws
provided. Again ensure that the
edge of the slide is on the 15
mm marking. Make sure that the
screws are fully tightened and
that the slides do not move
whilst you are fixing them
o Open the appliance door again
and then insert each slide back
into the guide.
the housing unit, through the five holes.
in the upper fixing bar and into the housin
unit.
in the lower hinges and into the housing unit.
oles
g
24