Safety Information - Baratza Esatto Operation Manual

Safety Information

Important Information
Please read the information below very
carefully. It contains important tips for
the use, safety, maintenance and care
of this appliance. Please keep these
operating instructions for future refer-
ence.
Your new
ESATTO
120 VAC or 230 VAC. Please confirm
the voltage of your
nameplate attached to the bottom of
the unit. The 120 VAC
used from 100 to 130 VAC and the 230
VAC can be used from 200
ESATTO
TM
to 240 VAC. Please insure your sup-
ply voltage range matches the name-
plate voltage on your
clean the
ESATTO
or slightly damp cloth. Do not use this
unit for anything other than its intended
use. If you cannot remedy a malfunc-
tion, please visit the web at www.barat-
za.com for assistance. Repairs are to
be performed only by authorized ser-
vice centers. An improperly repaired
is a source of risk to the user
ESATTO
TM
and voids the warranty. Baratza will not
accept any liability for damage or injury
if the is used other than for its
ESATTO
TM
intended purpose or is improperly op-
erated or repaired. All warranty claims
will be void.
is rated for either
TM
on the
ESATTO
TM
can be
ESATTO
TM
. Only
ESATTO
TM
housing with a dry
TM
For Your Safety
Do not operate the
damaged cord or plug, or if the
malfunctions. Do not leave your
TO
TM
unattended while turned ON.
ESATTO
TM
Unplug the
ESATTO
cal outlet before cleaning. To unplug,
grasp plug and remove from the outlet
- never pull on cord. Keep your
out of the reach of children. Do not
TO
TM
immerse the
ESATTO
water or any other liquid.
4
ESATTO
TM
Caution
from the electri-
TM
, plug or cord in
TM
with a
ESAT-
ESAT-