Advertisement
ASSEMBLY INSTRUCTIONS CONT.
Step 1
Begin assembly by removing the outer protec-
tive collar assembly. Remove the four (4) black,
phillips screws from tube collar located on the
top of water column base (see figures 2 and 3),
to remove the collar. Remove the collar assem-
bly.
Step 2
Removing the collar will expose four (4) more
brass screws that are used to secure the water
tube to the base, remove these four (4) brass
screws as well (see figure 4).
Step 3
When all the screws have been removed locate
the plastic air tube located inside the center
hole of the water base and pull it out. (see fig-
ure 5).
Affordable Quality Lighting Products from
Outer Collar
Assembly
Remove Four
(4) Screws
Remove Four
(4) Screws
American DJ
Los Angeles, CA. 90058 USA Page 2
®
Figure 2
Figure 3
Figure 4
Figure 5
Advertisement
