IMPORTANT SAFETY INFORMATION WARNING FOR YOUR PROTECTION READ THE FOLLOWING: KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECT FILLED WITH LIqUID, the symbols shown above are internationally accepted symbols that warn of potential SUCH AS vASES, SHALL bE PLACED ON THE APPARATUS.
Page 3
Vice-president of engineering Bs1362. 8760 s. sandy parkway sandy, utah 84070, usA date: November 1, 2010 european contact: Your local dbx sales and service office or harman music Group 8760 south sandy parkway sandy, utah 84070, usA ph: (801) 566-8800...
After expiration of the warranty, a reasonable charge will be made for parts, labor, and packing if you choose to use the factory service facility. In all cases, you are responsible for transportation charges to the factory. dbx will pay return shipping if the unit is still under warranty.
Proof-of-purchase is considered to be the burden of the consumer. 2. dbx warrants this product, when bought and used solely within the U.S., to be free from defects in materials and workmanship under normal use and service.
234s, 234xs Operating Controls Section 2 - Operating Controls 2.1 dbx 234s/234xs Front Panel Note: There are no front panel differences between the 234s and the 234xs. Therefore the 234xs is shown below, representing both the 234s and the 234xs.
223s, 223xs, Section 2 234s, 234xs Operating Controls 9 10 17 18 STEREO 3-WAY MODE In 3-way stereo operation the controls are marked in black BELOW the horizontal black line. Channel One and Channel Two functions are identical in the stereo mode. LEDs are disabled for controls which are non-functional in this mode.
223s, 223xs, Section 2 234s, 234xs Operating Controls MONO 4-WAY MODE In 4-way mono operation the controls are marked in red ABOVE the horizontal black line. Front panel controls not described in this section are not active in mono 4-way mode. LEDs are disabled for controls which are non-functional in mono 4-way mode.
223s, 223xs, Section 2 234s, 234xs Operating Controls 2.2 dbx 223s/223xs Front Panel Note: There are no front panel differences between the 223s and the 223xs. Therefore the 223xs is shown below, representing both the 223s and the 223xs. 11 12 STEREO 2-WAY MODE In 2-way stereo mode the controls are marked in black BELOW the horizontal black line.
223s, 223xs, Section 2 234s, 234xs Operating Controls MONO 3-WAY MODE In 3-way mono operation the controls are marked in red ABOVE the horizontal black line. Front panel controls not described in this section are not active in mono 3-way mode. LEDs are disabled for controls which are non-functional in this mode.
• Know the loudspeaker manufacturer’s requirements regarding the amplification needs of your particular speaker system. Follow the manufacturer’s guidelines carefully, as dbx is not responsible for damage relating to improper setup or implementation of the 234s/234xs or the 223s/223xs. • Without any audio or power connections in place, use the back panel switches on the crossover to set it to the proper mode of operation;...
The connectors which are not used in the selected mode are marked “not used”. This designation applies only to that mode of operation. 3.4 dbx 234s/234xs or 223s/223xs Audio Connections • Before connecting anything to the crossover, make sure it is not connected to any power source.
1/4” TRS type connectors. The tip of the plug is wired as hot (+), the ring is wired as cold (-), and the sleeve is wired as the ground or shield. For the dbx 223xs and dbx 234xs, the input and output connectors are XLR connectors.
223s, 223xs, Section 6 234s, 234xs Troubleshooting Section 6 - Troubleshooting NO SOUND If there appears to be no power: • Check that either the stereo or mono LED on the front panel of the 234s/234xs or 223s/223xs is lit. •...
Need help?
Do you have a question about the 223xs and is the answer not in the manual?
Questions and answers