Sony SVL24125CXW VAIO User Manual page 483

VAIO User Guide
How to Use
Troubleshooting
Hardware
Apps
Network / Internet
Backup / Recovery
Security
Peripheral Devices
Others
© 2012 Sony Corporation
What should I do if my computer screen goes
blank?
Make sure your VAIO computer is on and not in a power saving mode.
Make sure your VAIO computer is securely plugged into an AC outlet
power indicator light is on.
The display output may be set to an external display.
Press the P key several times while holding down the
desired display output, and then press the Enter key.
If you wait for a while and the computer screen remains blank, follow the procedures
below:
Press and hold down the
power indicator light is off, and then turn on your VAIO computer.
If the problem persists, press and hold down the
seconds and check if the power indicator light is off. Disconnect all cables and
peripheral devices, such as the power cord and the USB device, and wait about five
minutes. Then, put them back in place and turn on your VAIO computer again.
483
(Windows) key to select your
[Details]
(Power) button for more than four seconds, check if the
(Power) button for more than four
Search
Back | Back to Top
[Details]
[Details] and the