Table of Contents
Advertisement
4. Press the shutter button down halfway.
Pressing the shutter button down
halfway automatically focuses and
adjusts the exposure.
The focus-area frame turns blue and
the status LED lights green when the
camera is focused and exposure is
determined.
When the focus or exposure is not
suitable, the frame of the focus area
turns yellow and the status LED
flashes red.
5. Press the shutter button down fully to capture the image.
If the photographic preview is set to "On", images (the captured image)
will be displayed while the image is being recorded onto the memory.
When the voice memo is set to "On", [VOICE RECORDING] will be displayed
on the screen immediately after the image is captured and voice memo
recording will start.
Press the shutter button one more time during recording, or wait for 30
seconds, [VOICE RECORD END] will be displayed and the recording will
end. A [ ] icon is displayed with images that have been recorded with a
voice memo.
Using the LCD Monitor
Make sure that the battery and SD card are inserted before capturing images.
1. Press the POWER button to turn on the
camera.
2. Slide the mode switch to [
the mode dial to [
By default, the LCD monitor setting is
on.
3. C o m p o s e y o u r i m a g e i n t h e L C D
monitor.
4. Press the shutter button down halfway,
then press it down fully.
EN-20
] and set
].
1
2
Advertisement
Table of Contents
