Step 1: Install The Usb Driver; Step 2: Connect The Digital Camera To Your Computer - Acer Digital camera 6.20 Mega pixels User Manual

Step 1: Install the USB driver

Installation on Windows 98 & 98SE
The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE.
Windows 2000/ME/XP users need not install the USB driver.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. When the welcome screen appears, click "INSTALL USB DRIVER".
Follow the on-screen instructions to complete the installation.
3. After the USB driver has been installed, restart your computer.
Installation on MAC OS 9.0"
For Mac OS 9.0 or higher, the computer will automatically recognize the digital
camera and load its own USB drivers.

Step 2: Connect the digital camera to your computer

1. Rotate the mode dial to SET-UP and turn
your camera on by pressing the
2. Press to select the [Set-up2] menu, then
use to select [USB Mode]. Press the
button.
3. Use to select [PC], then press the
button.
4. Connect one end of the USB cable to an
available USB port on your computer.
5. There will be a new "Removable Disk" icon
detected in "My Computer", in which
contains your recorded images or video
clips.
(For Mac users, double-click [untitled] or
[ u n l a b e l e d ] d i s k d r i v e i c o n o n o u r
desktop.)
EN-40
Set-up1
button.
NTSC
PAL
Set :
Set :
Set-up2 Set-up3
PC
USB Mode
TV NTSC
LCD Brightness
Auto Shut Down 3 Min.
1 / 4
USB Mode
PC
PictBridge
PC CAM.
1 / 3