Asus P4B266-C User Manual page 43

7. VCORE over-voltage (3-pin OVER_VOLT)
When enabled, this jumper allows a CPU Vcore setting range of
+1.75V to +2.1V for Pentium 4 Willamette processor, and a 1.475V to
1.75V range for Northwood processor through BIOS Setup. When
disabled, the allowed Vcore settings are lower.
Setting to a very high core voltage may cause permanent damage to
the CPU. It is recommended that you keep the default setting
(Disable).
P4B266-C
®
P4B266-C OVER_VOLT Setting
8. Bass/Center setting (3-pin BCS1, BCS2)
These jumpers allow you to select the speaker output for a 6-channel
audio system. Switch the jumper settings from the default position
CENTER/BASS (pins 2-3) to BASS/CENTER (pins 1-2) to re-route
signals on the internal leads of the Mic port.
Use the audio driver included in the support CD to install the multi-
channel audio feature.
P4B266-C
®
P4B266-C Bass Center Setting
ASUS P4B266-C motherboard user guide
OVER_VOLT
3
2 2
1
DISABLE ENABLE
(Default)
BCS
BCS1 BCS1
BCS2 BCS2
1 2
(BASS/CENTER) (CENTER/BASS)
2 3
(Default)
2-21