Table of Contents
Advertisement
Available languages
Available languages
TROUBLESHOOTING
No dial tone
1. Check that all phone cord connections and AC adapter are
securely plugged into the phone, wall jack and electric outlet
of the main base.
2. Check that the AC adapter is securely plugged into the A600E
base and electric outlet.
3. Check that the handset batteries are installed properly and
are in full power (pages 6-7).
4. Check that the handset has been properly registered to the
main base (page 8).
5. Check that the phone is in the correct dialing mode: tone or
pulse.
6. Plug another phone into the wall jack to make sure your
phone service is working.
Nothing appears on the display
1. Check that the handset batteries are installed properly and are
in full power.
2. Check that the handset has been turned on (page 9).
TECHNICAL SPECIFICATIONS
General Number:
Amplification:
Power Requirements
AC power Adapter:
Base Input: 7.5V, 500mA
Handset Input: Ni-MH 1.2V x 3, 800mAh
Charging Time: 15 hours
Weight (lb): Base: .20 Handset: .26
Dimensions (in.) Base: 3.5x3.75x2 Handset: 5.24x1.8x.77
Jack: 2.5mm headset
Features and Specifications subject to change without notice.
A600E
Up to 50 dB incoming
14 – ENGLISH
Advertisement
Table of Contents
