Brother Innov-is NX-650 Operation Manual page 58

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
■ Using the manual thread cutter
When sewing with thread thicker than #30, nylon
or metallic threads, or other special threads, use
the thread cutter on the side of the machine to cut
the threads.
a When you wish to finish the stitching and the
sewing machine is stopped, press
("Needle Position" button) once to raise the
needle.
a "Needle Position" button
The needle is raised.
Raise the presser foot lever.
b
a Presser foot lever
Pull the fabric to the left side of the machine,
c
and then pass the threads through the thread
cutter to cut them.
1
a Thread cutter
56
1
a