Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
d
Insert the extra spool pin onto the bobbin
winder shaft.
Insert the extra spool pin so that it is
perpendicular to the bobbin winder shaft.
1
a Bobbin winder shaft
Swing down the spool pin so that it is
e
horizontal.
f
Place the upper thread spool for the needle on
the right side onto the extra spool pin, and
then secure it with the spool cap.
The thread should unroll from the top front of
the spool.
1
a Spool cap
b Spool
34
2
g
Thread the upper thread for the right side in
the same way that the upper thread for the left
side was threaded.
1
a Thread guide cover
• For details, refer to step
"Threading the upper thread" (page 28).
h
Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
i
Attach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the presser foot" (page 41).
CAUTION
● When using the twin needle, be sure to
attach zigzag foot "J", otherwise the
needle may break or the machine may be
damaged.
j
Turn on the sewing machine.
The LCD comes on.
h
j
through
of
Advertisement
Table of Contents
