Starting Wireless Lan Communications - Sony VPCEG11FX VAIO User Manual

VAIO User Guide VPCEG1/VPCEH1/VPCEJ1/VPCEL1 Series
Troubleshooting
How to Use
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications

Starting Wireless LAN Communications

You can establish wireless LAN communications between your VAIO computer and an
access point (not supplied) using VAIO Smart Network. Before using the wireless LAN,
make sure your access point is on and operating.
Read the instructions in Before Using the Wireless LAN for correct use.
1. Set the WIRELESS switch
2. Click (Start), All Programs, and VAIO Smart Network or click
VAIO Smart Network icon) in the desktop notification area.
3. Make sure the switch next to Wireless LAN or Wi-Fi is toggled to On.
If it is set to Off, click it to toggle to On.
Hint
Make sure the WIRELESS indicator light
4. In the VAIO Smart Network window, select a mode that suits your wireless LAN.
Refer to the help file included with VAIO Smart Network for more information
about operations.
5. Click
or (the Network icon) in the desktop notification area.
6. Select the desired access point and click Connect.
After the connection is established, Connected appears in the selected wireless
access point field.
If you cannot find the desired access point, click
If a security key [Details]
click OK. Note that security keys are case-sensitive.
Note
On IEEE 802.11a/b/g/n equipped models, when only the 2.4 GHz wireless LAN function
is enabled, your VAIO computer cannot connect to a 5 GHz wireless LAN access point.
Also, when only the 5 GHz wireless LAN function is enabled, the computer cannot
connect to a 2.4 GHz wireless LAN access point.
On IEEE 802.11b/g/n or IEEE 802.11b/g equipped models, when the 2.4 GHz wireless
LAN function is disabled, the computer cannot connect to an access point. Also, the
computer cannot connect to a 5.0 GHz wireless LAN access point.
It may take some time to find and connect to a wireless LAN access point before
starting communications via the wireless LAN.
Hint
Once you connect your VAIO computer to the access point by entering the security key,
the access point will be registered in the computer. You do not have to enter the security
key for subsequent connections.
To check wireless LAN connection status
You can move the mouse pointer over
notification area to check the wireless LAN connection status, such as the access point
currently connected to your VAIO computer.
159
to ON.
[Details]
[Details]
entry window appears, enter the security key as required and
or (the Network icon) in the desktop
Search
Back | Back to Top
[Details]
(the
is on.
(Refresh).