Bluetooth Mobile Phone - JVC KD-R80BT Instruction Manual

Connecting to JVC original
application
JVC original application is designed to view JVC
car receiver status and perform simple control
operations on Android smart phones.
For JVC original application operations, visit JVC
website:
<http://www3.jvckenwood.com/english/car/
index.html> (English website only).
1
(Hold)
2 Select <Connect>.
3 Select the desired smart phone.
"Connected" "[Device Name]" appears on the
display when the device is connected.
4 Press MENU to exit.

Bluetooth mobile phone

Receiving a call
To receive a call
When there is an incoming call, the source
automatically changes to "BT-1"/"BT-2".
"Receiving..." appears on the display, followed
by the phone number or name.
The display flashes in blue. (
You can also press / / / /SOURCE on the
remote control to answer a call.
When <Auto Answer> is set to <On>, the unit
answers incoming calls automatically.
( page 20)
<Bluetooth>
<Application>
<Connect>
page 20)
or
Bluetooth connection
Deleting a registered device
1
(Hold)
2 Select <Delete OK>.
"OK" appears when the device is deleted.
3 Press MENU to exit.
To end a call
(Hold)
You can also press and hold
on the remote control to end a call.
To deactivate/activate hands-free
mode
During a phone conversation...
Operations may vary according to the
connected Bluetooth device.
<Bluetooth>
<Delete Pairing>
[Device Name]
<Delete OK?>
or
(Hold)
/ / / /SOURCE
ENGLISH | 17