Acer P1223 User Manual page 15

# Icon Function
7 KeyPad 0 to 9
8 VIDEO
9 VGA
10 COMPONENT
11 HDMI/DVI
12 HIDE
13 SOURCE
14 RESYNC
15 Empowering
Key
16 Laser button
MUTE
17 KEYSTONE
18 MENU
Description
Press 0 to 9 to enter a password when required.
Press VIDEO to change source to composite
video.
Press VGA to change source to the VGA1-IN/
VGA2-IN connector. This connector supports
analog RGB, YPbPr (480p/576p/720p/1080i),
YCbCr (480i/576i) and RGBsync.
Press COMPONENT to change source to the
VGA1-IN/VGA2-IN connector. This connector
supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Press HDMI/DVI to change source to HDMI/
DVI.
Momentarily turns off the video. Press HIDE to
hide the image, press again to display the
image.
Changes the active source.
Automatically synchronizes the projector to the
input source.
Launches Acer functions: eView, eTimer,
ePower, e3D Management.
Aim the remote at the viewing screen, press and
hold this button to activate the laser pointer.
Turns the sound on/off.
Adjusts the image to compensate for distortion
caused by tilting the projector (± 40 degrees).
•
Press MENU to launch the onscreen
display (OSD) menu, back to the previous
step for the OSD menu operation or exit
the OSD menu.
•
Confirm your selection of items.
6