Commands - Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual

Command
8. Control Commands
HT
[Name] Horizontal tab.
[Format] ASCII
Hex
Decimal
[Description] Moves the print position to the next horizontal tab position.
LF
[Name] Print and line feed.
[Format] ASCII
Hex
Decimal
[Description] Prints the data in the print buffer and feeds one line based on the current line spacing.
FF
[Name] Print and return to standard mode in page mode.
[Format] ASCII
Hex
Decimal
[Description] Prints the data in the print buffer collectively and returns to standard mode.
CR
[Name] Print and carriage return.
[Format] ASCII
Hex
Decimal
[Description] When automatic line feed is enabled, this command functions the same as
LF : when automatic line feed is disabled, this command is ignored.
CAN
[Name] Cancel print data in page mode.
[Format] ASCII
Hex
Decimal
[Description] In page mode, deletes all the print data in the current printable area.
DLE EOT n
[Name] Real-time status transmission.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤n ≤4
[Description] Transmits the selected printer status specified by n in real-time, according to the following parameters :
n = 1 : Transmit printer status.
n = 3 : Transmit error status.
Samsung Electro-Mechanics
HT
09
9
LF
0A
10
FF
0C
12
CR
0D
13
CAN
18
24
DLE EOT n
10 04 n
16 4 n
n = 2 : Transmit off-line status.
n = 4 : Transmit paper roll sensor status.
8-1