Baumatic BR26A Instruction Manual page 9

NOTES ON USING your Baumatic BR26A FRIDGE-FREEZER
Reminder: Allow the unit time to settle after
delivery. If your plug and power socket are now
behind the fridge and you still need to move the
unit into place, be especially careful. Remember
to leave a safe distance between the back of the
fridge and the wall behind it. YOU WILL NEED
TO REMOVE THE BACK WALL OF THE UNIT
CABINET INTO WHICH THE APPLIANCE IS TO BE
INSTALLED.
o
NOTE: When you first switch on the appliance,
allow 24 hours for it to cool down to the desired
temperature. During this time, DO NOT open the
door often or place a lot of food inside the unit.
WARNING! If the appliance is switched off
then switched back on again after a short
period, the compressor will start up again
after approximately half-an-hour. This is
part of the normal operation of the
appliance.
You switch your fridge OFF by turning the
thermostat knob to position '0'.
8