Baumatic BR26A Instruction Manual page 25

INSTALLING YOUR BR26 FRIDGE-FREEZER
FIXING THE APPLIANCE INTO THE KITCHEN UNIT
Open the doors and find the holes through which you can
fix the appliance to the unit. Attach the appliance to the
inside of the unit as shown in Figure 5, below left.
(See Figure 5, above left). 1) Taking a drill bit with a
diameter of 3mm, make 5 holes as shown in figure 5.
2) On the upper side, fix the three screws A4 x 12 through
the rail.
3) On the lower side, fix the two screws A4 x 16 through the
lower hinges.
4) Seal the gap on the opposite side of the hinge with the
enclosed seal (see Fig. 6).
6) Fix the slides, being careful not
to move them while fixing them
into place (Fig. 4, at left).
7) Fix the slide guides to the
original position.
8) Close the door and check the
gasket seal (it should not be
creased or crushed). The door
should open and close
smoothly.
24