Printing With Windows Nt 3.51; Printing To The Parallel Port; Saving Files To Print At A Remote Location - Fiery 750DP - Phaser Color Laser Printer User Manual

3
3-12 Printing with Windows Computers

Printing with Windows NT 3.51

You can print from Windows NT 3.51 using the printer driver included with
Windows NT. However, this driver does not support DocuColor-specific options. See
Getting Started for information on the Windows NT PostScript printer driver.

Printing to the parallel port

The DocuColor has a parallel port that enables you to print most files directly from a
Windows computer if your network administrator has connected the Windows
computer's parallel port to the DocuColor parallel port.
You cannot use the Downloader through the parallel port.
N :
OTE
T
O PRINT FILES WITH THE PARALLEL PORT
1. Make sure the parallel port is enabled on your DocuColor.
Check with your site administrator to see whether printing to the parallel port is
enabled. See Getting Started for information on setting up parallel port printing on
your Windows computer.
2. Select the printer port that is connected to the DocuColor parallel port.
Select one of the local ports: LPT1, LPT2, or LPT3. For instructions, see your
Windows documentation.
3. Print from within your application.
Saving files to print at a remote location
If you do not have a DocuColor and are preparing files to take to a service bureau or
other location, print your final files to the File port (as opposed to one of the local
ports). You can also print to the File port to create a file to be downloaded using the
Downloader. For instructions, see your Windows documentation.
: