Table of Contents
Advertisement
8
Using Your ATI HDTV Component Video Adapter
5
6
7
8
9
If you experience problems, please see
page 9.
The HDTV settings page opens. The settings you selected
via the DIP switches are checked in Dongle Settings. (See
Setting the DIP Switches
To override the DIP switch settings, check the modes you
want in the Custom Settings buttons.
Click OK.
Click the Advanced... button,
Click the Adapter tab, then click the List All Modes...
button.
List All Modes is only available in Windows 2000 and
Windows XP. It is not available in Windows 98 / 98SE, or
Windows ME.
Click 640 x 480.
For Interlaced mode, click 30Hz or 60Hz.
YPbPr is only available with the 30Hz or 60HZ settings.
Windows XP does not enable 640 x 480 screen
resolution by default. To set 640 x 480 resolution,
right-click your desktop, click Properties, click the
Settings tab, click the Advanced button, click the
i
Adapter tab, click List all modes, then select
640 x 480.
• 60Hz = Progressive.
• 30Hz = Interlaced
on page 5.)
Troubleshooting Tips
on
Advertisement
Table of Contents
