Hot-Swap Tray; Hot-Swap Bay - Asus AP3000 Hardware Reference Manual

IV. Hardware Setup

Hot-Swap Tray

There are two levers on the front of the hot-swap tray to help release
or lock the tray. To remove the tray, extend both levers and pull on
both levers. To install the tray, push the tray firmly into the bay with
the levers extended, then close the levers.

Hot-Swap Bay

To remove the hot-swap bay, release the front cooling fans first by
pressing the eject mechanism with a small screwdriver. Remove the
six retaining screws as circled above and then the entire hot-swap
bay can be slid out of the chassis.
AP 3000 Hardware Reference Guide
1
2
3
4
5
29