Intel ® Rapid Storage Technology Option Rom Utility - Asus P8B-E/4L User Manual

5.3 Intel
Option ROM Utility
The Intel ® Rapid Storage Technology Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel ® Rapid Storage Technology option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008
Copyright(C) 2003-10 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Devices:
Port Drive Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
ASUS P8B-E/4L
®
Rapid Storage Technology
[ MAIN MENU
5. Exit
[ DISK/VOLUME INFORMATION
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
[ESC]-Exit
All Rights Reserved.
]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
]
* = Data is Encrypted
Size Type/Status(Vol ID)
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
[ENTER]-Select Menu
5-25