Tv Operation (Advanced) - Tevion 4683 User Manual

TV Operation (Advanced)

Analog TV.
After the basic setup, there are many other useful features to allow the full
features of the recorder to be realised.
Auto Tuning.
When Auto tuning is performed, the stations are stored in "Found" order.
To place the stations in the correct order i.e Location 1= BBC1,
Location 2 = BBC2 etc, you must enter the CHANNEL SET menu.
Press the SETUP button and with the navigation buttons select TV TUNER
(Fig 59).
Press the ► button and enter the adjacent sub menu, (Fig 60). Select
CHANNEL SET and press SELECT. (Fig 61).
It is recommended you have a current TV guide to hand.
Select Channel Number with the ▲/▼ buttons and to select the Channel
number use the ►/◄ buttons. Select (1).
Move the cursor to Swap Channel and with the ►/◄ buttons, find BBC1
station. You must press SELECT each time. When you have located BBC1,
wait a few seconds, the recorder will automatically swap the station into
location 1.
Select Channel number again, and select (2).
Move the cursor to Swap Channel, and using the ►/◄ buttons and SELECT
locate BBC2, again wait a few seconds, BBC2 will now be located in location
2.
To move the rest of the channels, continue as above.
The correct channel locations are :- BBC1(1), BBC2 (2), ITV1 (3), Channel 4 (4), Five (5).
Active.
This feature allows the user to (Hide) any channel tuned.
Select the channel you wish to hide, using the Channel Number box.
Select "ACTIVE" and to hide switch the status to "NO" using the ►/◄ buttons.
The selected channel will now not be accessed by the CH+/CH- buttons but still can be selected with the numeric
buttons. To turn off this feature, enter the menu and select "YES"
Fine Tune.
This feature is used to manually adjust the tuning of a station, if there is interference or a poor picture or sound.
Use the ►/◄ buttons to increase or decrease the level from "0".
Audio Format.
This feature allows the selection of the different sound standards in Europe. Pal "I" is the default state used in the
UK. B/G is used in Western Europe, D/K is used in Eastern Europe.
Channel Name.
You may name any channel using the Text keyboard.
Select the channel you wish to name in the Channel Number box.
Select Channel Name and press SELECT, the Text Keyboard will now be displayed (Fig 38). Move the cursor
around the keyboard using the navigation buttons and select OK to complete.
Manual Tune.
HELPLINE No UK / Northern Ireland 01422 26 32 98. Rep . Ireland No 1800 88 23 90.
WEB SUPPORT. www.ekey.co.uk
Model number 4683
Fig 59
System TV Signal
Playing Auto Tuning
A / V Set Channel Set
Recording Manual Tuning
TV Tuner
Digital TV
Fig 60
System TV Signal
Playing Auto Tuning
A / V Set Channel Set
Recording Manual Tuning
TV Tuner
Digital TV
Fig 61
Channel Number 1
Aotive Yes
Fine Tune o
Audio Format PAL-1
Swap Channel 1
Channel Name
Manual Tune Start