Asus P/I-XP6NP5 User Manual page 26

5. ATX Power Connector (20-pin block)
This connector connects to a ATX power supply. The plug from the power
supply will only insert in one orientation because of the different hole sizes.
Find the proper orientation and push down firmly making sure that the pins are
aligned.
CAUTION: To prevent electrical spikes, make sure that the power supply is
not connected to an outlet when making or removing connections. Power
supplies contain power reserves which can damage electrical components.
6. Floppy Drive Connector (34-pin block )
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to one or
two floppy drives. (Pin 5 is removed to prevent inserting in the wrong orien-
tation when using ribbon cables with pin 5 plugged).
20
III. INSTALLATION
PW-0K
ATX Power Connector
on Motherboard
Pin 1
ASUS P/I-XP6NP5 User's Manual
5.0V
12.0V
5.0V
5VSB
-5.0V
GND GND
5.0V GND
GND GND
PS-ON
5.0V
GND
GND
3.3V -12.0V
3.3V
3.3V
Floppy Drive Connector