Using Aflash From A Floppy Disk - Asus P4T533-C User Manual

Hide thumbs Also See for P4T533-C:
Table of Contents

Advertisement

4.1.2 Using AFLASH from a Floppy Disk

1. Type FORMAT A:/S at the DOS prompt to create a bootable system disk.
DO NOT copy AUTOEXEC.BAT and CONFIG.SYS to the disk.
2. Type COPY D:\AFLASH\AFLASH.EXE A:\ (assuming D is your CD-ROM
drive) to copy AFLASH.EXE to the boot disk you created.
NOTE!
DOS prompt within Windows, and does not function with certain memory
drivers that may be loaded when you boot from the hard drive. It is
recommended that you reboot using a floppy disk. Use only a DOS 6.2,
WIN95 / WIN98 boot disk.
3. Reboot the computer from the floppy disk.
NOTE!
sequence.
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH.
IMPORTANT!
memory chip is either not programmable or is not supported by the ACPI
BIOS and therefore, cannot be programmed by the Flash Memory Writer
utility.
5. Select 1. Save Current BIOS to File from the Main menu and press
<Enter>. The Save Current BIOS To File screen appears.
6. Type a filename and the path, for example, A:\XXX-XX.XXX, then
press <Enter>.
ASUS P4T533-C motherboard user guide
AFLASH works only in DOS mode. It does not function in the
BIOS setup must specify "Floppy" as the first item in the boot
If the word "unknown" appears after Flash Memory:, the
49

Advertisement

Table of Contents
loading

Table of Contents