Table of Contents
Advertisement
4. USB 2.0 (3 pin USB20_EN)
The USB 2.0 header (USB20_12) is enabled by the default setting, [1-2].
Select [2-3] to disable the header.
®
P4T533-C
P4T533-C USB2.0 Setting
5. USB Device Wake-Up (2x3 pin USBPWR_12, _34)
The default setting, [1-2] (+5V) enables the USB wake-up feature. Reset
these jumpers to pins [2-3] (+5VSB) to disable the wake up feature.
The USB device wake-up feature requires a power supply that can
provide at least 1A on the +5VSB lead. If this requirement is not met,
the system does not power up. The total current consumed must NOT
exceed the power supply capability (+5VSB) whether under normal
condition or in sleep mode.
®
P4T533-C
P4T533-C USB Device Wake Up
ASUS P4T533-C motherboard user guide
USB20_EN
1 2
2 3
Enable
Disable
(Default)
USBPWR_12
1 2
2 3
+5V
+5VSB
(Default)
USBPWR_34
1 2
2 3
+5V
+5VSB
(Default)
25
Advertisement
Table of Contents
