5.
Position the CPU over
the socket, ensuring that
the gold triangle is on
the bottom-left corner of
the socket. The socket
alignment key should fit into
the CPU notch.
6.
Close the load plate (A), then push
the load lever (B) until it snaps into
the retention tab.
The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
The motherboard supports Intel
SpeedStep
1-10
Alignment key
Gold triangle mark
®
Technology (EIST), and Hyper-Threading Technology.
®
B
LGA775 processors with the Enhanced Intel
Chapter 1: Product introduction
A