Asus Mylogo2 - Asus A7N8X-VM User Manual

Hide thumbs Also See for A7N8X-VM:

Table of Contents

If you selected the option to update the

BIOS from a file, a window pops up

prompting you to locate the file. Select the

file, click Save, then follow the screen

instructions to complete the update

process.

ASUS MyLogo2™

The ASUS MyLogo2™ is automatically installed when you install the ASUS Update

utility from the software menu. See page 3-7 for installation of ASUS Update.

Before using ASUS MyLogo2 feature, use the AFUDOS utility to make a copy of

your original BIOS file, or obtain the latest BIOS version from the ASUS

website.

Make sure that the BIOS item Full Screen Logo is set to [Enabled] if you wish to

use ASUS MyLogo2. See details on page 2-18.

Follow these steps to use ASUS MyLogo2.

1. Launch the ASUS Update utility. See

page 3-7 "ASUS Update".

2. When prompted for the BIOS update

method, select the option "Update

BIOS from a file."

3. Specify the location of the BIOS file,

such as from a floppy disk. Click Next.

4. From the selection that appears,

choose a logo image. Click Next.

If you wish, you may create your

own boot logo image in GIF, JPG,

or BMP file formats.

3-8

Chapter 3: Software support

Table of Contents