Before installing the CRW-5232AS drive, make sure that your computer system
meets the following requirements.
IBM-compatible Pentium III 700MHz or Celeron 700MHz or
AMD Duron 850 MHz or higher PC
98/ME/2000/NT/XP, DOS 6.xx, Linux operating system
At least 64MB RAM (128MB recommended)
An empty 5.25-inch drive bay
HDD empty storage capacity of 100MB or more
Average seek time: 20ms or less
Transmission rate: 2 MB/s or more
1. Avoid using a hard disk that thermally calibrates during operation.
2. Do not insert damaged or warped disc in the drive to avoid potential body
injury or damage to the drive.