Table of Contents
Advertisement
Operating Manual - FR-8 and FR-16 Remote Level Controller
Global Features
Device Name:
in the network tree in the Protea
Target Security:
= "default" with no password), the FR remote will have full access to all available control parameters
on the targeted DSP device. However, if an administrator wishes to limit control parameter access from
a FR controller to a selected target device, they must enter the same user name and password on both
the FR-8/16 target security fields and on the specified target's device users section, under the general
security tab. Think of it as creating a login requirement for each device before they can be assigned to
work together, up to the level of parameter access granted by the target device. Note that even though
"Default" and "Admin" are reserved system user names, any changes to these reserved FR name or
password fields requires a corresponding entry on the target device. Also note that target security is
completely independent from the general FR security section described on page 9, and that user names
and passwords implemented there have no impact to or from those used for target security.
LED Brightness:
one of four levels to match ambient room lighting. The factory default is for the brightest setting.
Clear All:
This button clears the control parameters of all faders in the configuration
window and returns them to factory default settings. It also clears the FR device target security user
name and password. Note: individual fader parameters can be cleared by clicking on any control
for that fader and then clicking the pop-up "Clear Fader" button associated with that fader.
Up to 20 characters can be used for the device name. The name appears
Software startup screen, as well as the main FR device screen.
ne
When target security is left unspecified or in its default state (user name
The overall brightness of FR-8 and FR-16 LEDs can be adjusted to
7
Advertisement
Table of Contents
