Contents Installation Of The TFT TV To The Wall ....................... 1 Remote Control Buttons ..........................2 LCD TV ...............................2 Preparation ..............................3 Safety Precautions .............................3 Before Switching On Your TV ........................5 Switching The TV ON/OFF ......................... 5 Navigating the Menu System ........................6 Menu System ..............................
Remote Control Buttons = Index Page Signal Indicator =Reveal = Cursor Up Blue button/Guide = Install = Stand By Yellow button / = Feature = Cursor Right SELECT Green button / = Picture OK/SELECT = Okay (Store) Red button = Sound = Cursor Down /WIDE = Image size / 0 - 9 = Direct Programme...
Preparation Safety Precautions For ventilation, leave a space of at least 10 cm free all Please read the following recommended safety pre- cautions carefully for your safety around the set. To prevent any fault and unsafe situ- ations, please do not place any objects on top of the 1.
Page 5
8. Replacement Part When replacement parts are required, be sure the ser- vice technician has used replacement parts which are specified by the manufacturer or have the same speci- fications as the original one. Unauthorised substitutions may result in fire, electrical shock, or other hazards. 9.
Before Switching On Your TV Switching The TV ON/OFF Power Connection To switch the TV on: IMPORTANT: The TV set is designed to operate on Your TV will switch on in two steps: 230-240V AC, 50 Hz. 1. Connect the power supply cord to the Tv. Press the •...
Contrast/Brightness/Sharpness/Colour/Hue Navigating the Menu System By pressing button, select the desired Option. Press button to set the level. Hint: Hue is displayed in picture menu when the TV receives an NTSC signal. Colour Temp For navigation ...
Volume Dynamis Bass select Volume . Press Dynamic Bass is used to increase bass effect of the By pressing TV set. button to change the level of the Volume. Equalizer By pressing button, select Dynamic Bass. By ...
Note: When TV Source is set to HDMI, HDMI Audio setting will be available among EXT-2 Out options. Program Table Blue Background You can set the TV to automatically change to a blue BBC 1 S 18 screen if the signal is weak or absent, or when there C 04 S 29 is no input from an external device.
Page 10
Channel Auto Program Channel can be changed by “ ” / “ ” button or Digit Buttons. Colour System By pressing button, select Colour System. Country Press “ ” / “ ” button to change the colour system to PAL, SECAM, PAL60 or AUTO.
system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC Other Features 3,58 or AUTO. TV Status Programme Number, Programme Name, select VCR. By pressing “ ” / By pressing Sound Indicator and Zoom Mode are displayed “ ” button, you can set the VCR to ON or OFF. . on the screen when a new programme is entered.
Freeze Picture • For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), You can freeze the picture on the screen by pressing use the Full mode to restore the picture to its original the “OK”...
Connect Peripheral Equipment • When ” ” button is pressed while in teletext mode, the screen will be splitted into two windows, one High Definition displaying the teletext and the other displaying the Your LCD Television is capable of displaying High current channel.
Playback NTSC Tips • Connect NTSC VCR player to a Scart socket of the Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do Then, press the “AV” button to select EXT1 or EXT2. not use abrasive solvents as they may damage the Copy Facility TV screen coating layer.
Appendix A: Aerial Connection Outdoor Aerial Connection Round 75 ohm coaxial cable 75 VHF/UHF Rear of TV Appendix B: Connect Peripheral Equipment HEADPHONE AUDIO AUDIO IN VIDEO IN VIDEO ANT .IN CAMCORDER SATELLITE RECEIVER ANTENNA CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage”...
User Help Guide Should you have problems with this Tv please consult the guide below before calling the Technical Help Line. SYMPTOM POSSIBLE CAUSE REMEDY Ensure the Tv is connected to the mains and Supply not connected to Tv. is turned on. DEAD No Power Press the button at the Rear of the Tv TV not switched on.
Peripheral Equipment Connections Entrée S-VHS Entrée vidéo Entrées Audio Casque Entrée du fil électrique Bouton MARCHE/ARRÊT Pour utilisation de service uniquement Entrée HDMI SCART 2 SCART 1 Entrées des éléments audio Entrées des éléments vidéo (YpBpr) Entrée audio PC 220V-240V POWER AC~50 Hz Note: Because FAV CVBS and SVHS Y are connected parallelly, the picture may blend if the two peripherals are...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...
Need help?
Do you have a question about the AV32751-HD and is the answer not in the manual?
Questions and answers