The Cr104 Remote; Remote Control - Arcam BDP300 Handbook

The CR104 remote

The CR104 is a sophisticated 'universal' remote control
that can control up to eight devices – including the
BDP300. As it's a 'learning' remote, it can copy almost
remote
any function from an existing single-device remote.
control
You can also program the CR104 to issue a sequence of
commands ('macros') from a single button press.
Select the source key first
Remember to select a source key before pressing
command buttons – commands vary depending on the
source selected.
To operate the BDP300 from the remote, first press the
source button.
BD
SAT AV
TUN
BD
PVR VCR
AMP CD
DISP (display)
Press to cycle through the front panel display's
brightness options (dim to bright, off).
Source selection and handset configuration
BD BD input/BD controls
SAT Satellite decoder input/SAT controls
Television (sound) input/AV controls
AV
Radio tuner input/TUN controls
TUN
Arcam amplifier
AMP
PVR Personal Video Recorder input/controls
Video Cassette Recorder input/controls
VCR
CD player input/CD controls
CD
Press the relevant button once to select input and
reconfigure the handset.
Press and hold the button until the power LED blinks
once if you wish to reconfigure the handset without
changing the input.
Navigation buttons
Arrow buttons allow navigation around the settings
menus on the BDP300 and disc menus.
Confirm a selection by pressing O .
MODE
This button activates the Picture-in-Picture Secondary
Video function, where available.
MUTE
Press once to mute an Arcam amplifier. Press again (or
use volume) to un-mute.
+/–
VOLUME +/–
Adjusts the volume of an Arcam amplifier.
OPEN
Opens and closes the disc tray.
SETUP
Press to access the system settings menu.
SETUP
CANCEL RPT
TV
DISP
RND
AV
HDMI NET
SHIFT STATUS iPOD
SAT AV
BD TUN
PVR VCR
AMP CD
MODE MENU
RTN
CH
DIRECT EQ EFFECT BASS
SYNC ANGLE/SUB
TRIM TREBLE
SRCH
HOME INFO
FAV + FAV -
SETUP TITLE AUDIO SUBT
CR104
E-12
On/Standby
This allows the BDP300 to be put into and taken out of
standby remotely.
Numeric keys, 0–9
Used for data entry. Also gives direct access to
individual tracks on audio CDs.
RND
Toggles random ('shuffle') play of chapters/tracks on
and off.
Press S followed by r to cycle through repeat play
options (chapter, title, disc, etc.).
STATUS
Toggles the disc information display.
Press s followed by to cycle through the HDMI
STATUS
output resolutions (only available from the Home
screen).
MENU
Activates the BD 'popup' menu or the DVD Video
menu.
RTN
Navigates to the previous menu.
0 /
Press to skip backwards to the previous track( 0 ) or
forwards to the next track ( ).
/
Playback control
Play ( 4 ), Pause ( ; ) and Stop ( < ).
+ ; activates slow playback.
SHIFT
Advanced controls
These buttons are described on the next page.