Searching an input signal
Press SEARCH button on the remote control.
1.
The projector will start to check its input ports as below in
order to fi nd any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
COMPUTER IN1
VIDEO
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
Selecting an aspect ratio
Press ASPECT button on the remote control.
1.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
For a computer signal
NORMAL
For an HDMI
NORMAL
For a video signal, s-video signal or component video signal
4:3
16:9
For an input signal from the LAN, USB TYPE A or USB TYPE B port, or
if there is no signal
4:3 (fi xed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
COMPUTER IN2
HDMI
4:3
16:9
16:10
TM
signal
4:3
16:9
16:10
14:9
LAN
USB TYPE A
USB TYPE B
14:9
Operating
SEARCH button
VIDEO
COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
FREEZE
MAGNIFY
PAGE
VOLUME
UP
ON
OFF
DOWN
MY BUTTON
KEYSTONE
MUTE
53), the
ASPECT button
VIDEO
COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
FREEZE
PAGE
VOLUME
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE
MUTE
23