Tascam BB-1000CD Release Notes page 2

Confirmation of firmware version
Confi rm the fi rmware version of your BB-1000CD before
conducting a fi rmware update.
1 Turn the unit's power ON.
2 The firmware version is displayed at the bottom
of the start-up screen.
You do not need to update the unit's fi rmware if the version
shown is the same as or newer than the version that you
intend to use for the update.
Firmware update procedures
CAUTION
When you update the fi rmware, make sure that the battery has
enough remaining power or use the supplied AC Adapter (PS-1225L).
The program has been set so that the update will not be conducted
if the battery power is insuffi cient.
1 Download the most recent firmware from the
TASCAM web site (http://www.tascam.com).
2 Copy the update file to the root folder (the
highest level folder in the hierarchy) on the SD
card with a card reader.
CAUTION
Do not make other fi les/folders on the SD card.
3 Turn the unit's power OFF.
4 Insert the SD card you copied the update file
onto in step 2 into the SD card slot.
5 While pressing and holding both the
and / keys, turn the unit's power ON.
Á π
The unit starts up in update mode, and the update fi le
appears on the screen.
NOTE
• This screen shows a list of the fi rmware update fi les in the root
folder of the unit. Also, the screen shows the fi rmware on the SD
card copied in Step 2 above. "No Update File" appears if there are
no update fi les in the root folder or on the SD card.
• The screen shown is an example. The actual display diff ers.
CAUTION
If this screen does not appear, turn the unit's power OFF. Then while
pressing and holding both the MENU and
power ON again. Continue to hold the MENU and
until this screen appears.
2
TASCAM BB-1000CD
BB-1000CD
MENU
Á π
/ keys, turn the unit's
Á π
/ keys fi rmly
Release Notes
Start-up screen
6 Select the firmware (highlight the item) then
press the key. The following screen
ENTER
appears.
The current version appears on the left and the updated
version appears on the right.
NOTE
The screen shown is an example. The actual display diff ers.
7 Press the key to start the update.
ENTER
CAUTION
Do not turn the unit's power OFF until the update is complete.
8 When the update is complete, the following
screen appears. Confirm the following screen
and turn the unit's power OFF.
9 Follow the "Confirmation of firmware version"
instructions above to check that the "
now the most recent version of the firmware.
This completes the procedure for updating this unit.
10 Delete the update file in the root folder.
" is
Ver