Connecting Digital Audio to a Digital Receiver System
The DTV-140 can output digital 5.1-channel digital audio signals over SPDIF
Digital Audio. If you have a digital decoding receiver system with an SPDIF Digi-
tal Audio jack:
•
Make the audio connection. Using an optional coaxial digital audio cable,
connect the unit's SPDIF Digital Audio Out jack to the Digital Audio Input
jack of your receiver.
Combine the digital audio connection with any video connection for a
complete audio/video experience.
To avoid signal interference, use only one audio connection type at a
time.
Digital Audio can be output in two formats: Raw or PCM. For more
information, please refer to your receiver's documentation.
Page 1
CONNECTIONS
DTV-140
SPDIF Coaxial Digital Audio Cable
Audio Input Panel of
Receiver/Amplifier
SPDIF DIGITAL
AUDIO INPUT
Coby Electronics Corporation