Turning The Camcorder On And Getting Started; Record 3D Video; Turning Off The Camcorder - Toshiba CAMILEO Z100 User Manual

24
Getting Started

Turning the camcorder on and getting started

Writable
position
(Sample Illustration) Protecting data on an SD
Turning the camcorder on and getting started
To turn on the camcorder, either:
❖
Flip the LCD touch screen outward to turn on the camcorder
automatically.
❖
Or press the Power (
to turn it on.
To record video: Press the Video ( ) button to begin recording.
Press it again to stop recording.
To take a photo: Press the Photo (
take a photo.
To view stored videos and photos: Touch the screen and press the
onscreen

Record 3D video

❖
Press the 3D (
modes.
❖
You can play back 3D video with this camcorder (same
operation as above).
NOTE

Turning off the camcorder

To turn off the camcorder, either press the Power (
one second, or place the LCD touch screen back to its original
position.
NOTE
Write-protected
position
icon to switch to Playback mode.
) button to switch between 2D and 3D
When the camcorder is switched from 2D to 3D, the screen flashes
and becomes darker. This is not a malfunction.
If you close the LCD panel while recording, the camcorder stops
recording.
) button for approximately one second
) button halfway down to
™
Card
) button for