Connecting To A Tv Or A Vcr - ATI Technologies 100-437009 - Radeon 9600 SE 128 MB DRR2 Video Adapter User Manual

Connecting to a TV or a VCR

To connect your RADEON 9600 Series to a TV or a
VCR, use the available TV Output connector. Your
card will support either a S-video connector or a
Composite connector. If your TV has cable input
only, you can connect your card to your TV through
your VCR or an RF modulator (available in most
electronics stores).
The RADEON 9600 Series with the Composite out
connector DOES NOT support connection to TVs
with S-Video In.
Connecting Your TV Output to a TV or VCR
1
2
3
Turn off your PC and your TV (or VCR).
Determine if your TV (or VCR) has a S-Video In
or Composite In connection.
The TV Output on your RADEON Series will be
either a S-Video connector or Composite
connector. Attach an appropriate cable to the TV
Output on your card (S-Video or Composite*).
Attach the other end of the cable to your TV (or
VCR). Refer to the illustration for further help.
*
available from www.ati.com
30