Display Configurations
The following table lists the different ways you can
connect displays to your RADEON 9600 Series with
multimonitor configuration
Display
Configuration
One CRT display
One DFP display
One TV
CRT display +
TV
*
Connector(s) Used
VGA connector OR DVI-I
connector with DVI-I-to-VGA
adapter*
DVI-I connector
TV Output
VGA connector +
TV Output
available from www.ati.com
S-VIDEO OUT
VGA
CONNECTOR
FROM
MONITOR
Comments
CRT- cathode ray tube analog
display
DFP - digital flat panel display
Cards with S-Video out also
support Composite out via a
S-Video-to-Composite
adapter*. Cards with
Composite out DO NOT
support connection to TVs with
S-Video Input.
Unsupported configuration if
the CRT display is attached to
the DVI-I connector via a DVI-I-
to-VGA adapter*
6