Panasonic AVCCAM AG-3DA1 Brochure page 9

Versatile Solid-State Recording Functions
• Thumbnail View for easy playback or deletion of clips displayed on
the LCD monitor
• Shot mark: Allows convenient OK and NG marking, and can be
added to each clip during or after recording.
• Rec check: You can check the end of the most recently recorded
clip with one-touch ease.
Clip Metadata Function
You can create a metadata upload file (produced with AVCCAM
Viewer software) containing information such as clip name, the name
of the camera operator, the recording location, and text memos on an
SD/SDHC card, and load it as clip metadata. This information will be
very useful when it comes to editing the project and quickly finding
the right clip to place on the timeline.
Professional-Level Audio Input
The AG-3DA1 is equipped with two audio input channels for
digital audio (Dolby Digital) recording.
The AG-3DA1 also comes equipped with a built-in
stereo microphone and with XLR-type audio input
terminals (2 channels, mic/line switchable, 48 V
compatible) on the rear panel. You can switch audio
channels 1 and 2 separately to either line or front mic
input. Large level adjustment dials are easy to operate
and offer high visibility.
SMPTE Time Code Generator/Reader
The built-in SMPTE time-code generator/reader lets you select the
Drop Frame/Non-Drop Frame and Free Run/Rec Run modes, preset
and regenerate. User bits are also provided.
HD SDI Simultaneous Output with Sync-Rec Function
HD SDI Left/Right terminals on the AG-3DA1 allow camera-through
or playback left-channel/right-channel FULL HD 3D image output
(simultaneous). This enables 3D images to be monitored on a
BT-3DL2550 3D Video Monitor. When the external recorders/recorder
are/is connected, line recording of camera-through FULL HD 3D
video signals is also possible.
HD SDI dual output*
(simultaneous system)
AG-3DA1
HD SDI dual output*
(simultaneous system)
AG-3DA1
HDMI 3D output*
AG-3DA1
HDMI 3D Output
The AG-3DA1 features an HDMI output terminal that outputs
FULL HD 3D video signals for viewing on 3D VIERA and
Panasonic 3D plasma displays. This terminal outputs camera-
through signals or left-channel/right-channel FULL HD 3D
playback signals.
*1: HDMI output and HD SDI output cannot be used simultaneously.
3D Compatible Camera Remote
The camera remote terminal allows remote adjustment of the
convergence point in addition to the focus, iris, zoom
and REC start/stop.
1
BT-3DL2550
3D LCD Video Monitor
1
External recorder (s)
1
Professional 3D plasma display
and 3D VIERA
8