Re-Scan For Channels - Acer AT4202P User Manual

Re-scan for channels

The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please
follow the steps below:
Scanning for channels
MENU
1
2
MENU
3
MENU
4
AT4202P.EU.EN.indb 23
MENU
Press the MENU key on the remote control to bring up the OSD.
Use the directional keys to navigate and select
MENU
Select OK and press MENU to exit.
Channel Management.
Highlight Auto Scan. Then, select Start
and press OK to begin.
23
3/8/2006 9:13:02 PM