Basic Connections; Connecting The Power Cord; Setting Up The Remote Control - Acer AT4202P User Manual

Basic connections

Connecting the power cord

1 Connect the AC cord into the AC input on the back of the set.
2 Connect the plug to the wall outlet as shown.

Setting up the remote control

1 Open the cover on the back of the remote unit.
2 Insert two AAA batteries (supplied) to match
the polarity indicated inside the battery
compartment.
10
AT4202P.EU.EN.indb 10
Looking after your remote control
-
+
+
-
• Handle the remote control with
care. Dropping, wetting or placing
the remote control in sunlight may
damage it.
Kid
• Do not tamper with batteries. Keep
them away from children.
• When you anticipate that the
remote control will not be used for
an extended period, remove the
batteries to prevent possible damage
as a result of battery leakage.
• Dispose of used batteries according
to local regulations. Recycle if
possible.
3/8/2006 9:12:49 PM