Table of Contents
Advertisement
This section has two table lists, system memory specification and the possible combinations of memory
module.
System Memory
Item
Memory socket number
Support memory size per socket
Support maximum memory size
Support memory type
Support memory speed
Support memory voltage
Support memory module package
Support to parity check feature
Support to Error Correction Code (ECC)
feature.
Memory module combinations
Memory Combinations
Slot
Slot 1 (Bank 0 & Bank
1)
Slot 2 (Bank 0 & Bank
1)
Maximum System Memory Supported
Cache Memory
Item
First-Level Cache Configurations
Cache function control
Second-Level Cache Configurations: Below information is only applicable to system with installed Pentium 4
processor.
L2 Cache RAM size
L2 Cache RAM speed
L2 Cache function control
Video Interface
Item
Video controller resident bus
Video interface support
Chapter 1
2 slots (4 banks)
64MB~1GB
2GB
DDR SDRAM
266MHz(PC2100)
2.5V
184 -pin DIMM
Yes
Yes
You can install memory modules in any combination as long as they match
the Memory Combination specifications.
Memory Module
64MB, 128MB,
64MB~1GB
256MB, 512MB, 1GB
64MB, 128MB,
64MB~1GB
256MB, 512MB, 1GB
64MB~2GB
Enable/Disable by BIOS Setup (Advanced options)
Pentium IV processor: 256 KB
The same with the processor core clock frequency
Enable/Disable by BIOS Setup
AGP bus
1x / 2x / 4x AGP Signaling and 2x / 4x Fast Writes
The AGP buffers operate only 1.5V mode
Specification
Total Memory
Specification
15
Advertisement
Table of Contents
