Table of Contents
Advertisement
screw.
Optional Wall Mounting
Your Voice 6090 can be wall mounted to any wall surface using
two Pan head type self-tapping screws (not supplied).
1. Install two self tapping screws at a distance of 3
(79.0 mm) from each other and located on a horizontal center
line.
2. If you are mounting to a plaster board wall surface, it may be
necessary to first drill two holes and install two expanding
plastic anchors (not supplied) into the wall.
Expansion
3. Press
an
Anchor
chor
into
holes.
4. Tap the anchor into the wall with a hammer
until the anchor is completely seated.
5. Insert a screw into each mounting hole and
tighten each screw with a screwdriver.
6. Tighten each screw just enough to allow the
keyhole slots on the 6090 unit enough clear-
ance to slip snugly over each screw head.
7. Slide the unit on to the screw heads and
press downward until firmly seated.
Setting the Time and Date
6090 eng
page 11
7
/
64
Pan Head Type
expansion
Self Tapping Screw
each of the two
10
Thursday, March 02, 2000 22:50
Composite
inches
an-
Advertisement
Table of Contents
