Table of Contents
Advertisement
Connecting a computer
You will need a 9-pin serial cable. In
addition, if your computer uses a 25-
pin connector for its serial port, you
need a 9-pin to 25-pin adapter. These
are available at any computer store.
1. Plug one end of the serial cable
into your computer.
2. Plug the other end of the serial
cable into your
port on your
EFA.
3. Follow the instructions that
came with your software to
configure your computer for the
following serial format:
•
9600 baud
•
8 data bits
•
No parity
•
1 stop bit
10 Enhanced Feature Adapter User Guide
Connecting a printer
To connect a printer, you will need a
9-pin null modem adapter and a 9-pin
serial cable. In addition, if your
printer uses a 25-pin connector for its
serial port, you will also require a 9-
pin to 25-pin adapter. These are
available at any computer store.
Note: The Scriptos
Technologies serial printer. No. 550
0102 02 103 is an example of a serial
printer that works with the Venture
EFA.
1.
Plug the null modem adapter
into either end of your 9-pin
cable.
2.
Plug either end of the 9-pin cable
into your printer.
3.
Plug the other end of the 9-pin
cable into your
port on your
EFA.
4. Follow the instructions that
came with your printer to
configure your printer for the
following serial format:
•
9600 baud
•
8 data bits
•
No parity
•
1 stop bit
Activating CDR
Activating CDR includes turning on
CDR, turning on Account code and
selecting on of these four CDR
output formats:
CDR in English
•
—a printer
format used to print call
records in English
CDR in French
•
—a printer
format used to print call
records in French
CDR in Spanish
•
—a printer
format used to print call
records in Spanish
Advertisement
Table of Contents
