VTech InnoTab 2S Pink Wi-Fi Learning App Tablet User Manual page 31

The cartridge icon does
not appear on desktop.
USB connection window
does not pop up after
connecting to computer.
Clock time is not
accurate.
Touch screen is
inaccurate or it is
impossible to select
the correct icon on the
screen.
Inserted an SD memory
card (not included),
but the tablet cannot
recognize it.
Files copied to the
tablet's internal memory
disappeared.
Poor cartridge
connection.
The cartridge is not
compatible.
Poor USB cable
connection.
Connection is
running through
USB hub.
Backup battery
power low.
Touch screen
requires calibration.
SD memory card
format is not FAT32.
The tablet's memory
was not formatted to
FAT32.
Remove the cartridge, clean it if
necessary, and then re-insert it
into the InnoTab 2S.
®
Check the cartridge label or
cartridge user's manual to
make sure it is compatible to
InnoTab 2S.
®
Securely connect the USB
cable to InnoTab
®
computer.
Connect the InnoTab
directly to the computer, without
using a hub.
Replace backup battery (for
backup battery replacement
instructions, please see the
Care & Maintenance section on
page 25).
Turn the InnoTab
®
hold , and
when turning the InnoTab
Follow the steps on the screen.
Format the SD memory card to
FAT32 in your computer.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
2S and the
2S
®
2S OFF. Then
down
2S ON.
®
28