VTech InnoTab 2S Pink Wi-Fi Learning App Tablet User Manual page 14

Setting Up Your Wi-Fi Connection on InnoTab
1. After you have registered your InnoTab
Learning Lodge Navigator
disconnect it from your computer.
2. Turn on InnoTab
the main menu. In the Settings Menu, touch Parent
Settings (hold down the
Settings).
3. Touch the
networks. Touch the network that you would like to
connect to, and enter a password if needed. You will
see a checkmark when the connection is complete.
Touch the
main menu.
Your InnoTab 2S secure connection to Learning
®
Lodge Navigator
the Wi-Fi connection to:
1. Use the Wish List Maker app to browse
downloadable apps.
2. Use the Downloads app to download apps after you
have purchased them.
To enable or disable Wi-Fi, press the
When Wi-Fi connection to Learning Lodge Navigator
will try to connect to known networks that have been connected before. If
no known network is found, you will be prompted to select the network
available in your current location. Choose an available network to connect
to. You may be required to enter additional information depending on
network settings.
To save battery life, InnoTab
connection when it is not in use.
NOTE: InnoTab
11
, turn the tablet off and
®
2S. Touch the Settings icon in
®
button to enter Parent
icon. The tablet will list available
button to return to the InnoTab
is now set up! Your child can use
®
2S will automatically turn off the Wi-Fi
®
2S supports 802.1 1b and 802.1 1g wireless standards.
®
2S
®
2S on
®
2S
®
button on the InnoTab
is needed, the tablet
®
2S tablet.
®