AEG ARCTIS G 78850-4 i Operating Instructions Manual page 11

9. Open the appliance door and the furni-
ture door at 90°. Insert the small square
(Hb) into guide (Hb). Put together the
appliance door and the furniture door
and mark the holes as indicated in the
figure.
10. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of the
door where the nail must be fitted (K).
11. Place the small square on the guide again
and fix it with the screws supplied.
At the end of installation/adjusting, it is nec-
essary to check if the door of the furniture
closes properly.
Should adjustment of the furniture door be
necessary, use the clearance of slots.
12. Fix cover (Hd) on guide (Hb) until it clips
into place.
Installation
11