Asus KFSN4-DRE SAS User Manual page 104

3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
The numbers of the channel depend on the controller.
The Adapter Properties screen appears.
4.
Use the arrow keys to select RAID Properties, then press <Enter>.
The Select New Array Type screen appears.
5.
Use the arrow keys to select Create IM Volume, then press <Enter>.
5-10
LSI Logic Config Utility
Adapter List Global Properties
Adapter PCI PCI PCI
BUS Dev Fnc
SAS1064E 04 03 00
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Global Properties -/+ = Alter Boot Order
LSI Logic Config Utility
Adapter Properties -- SAS1064E
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility
Select New Array Type -- SAS1064E
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
v6.16.00.00 (2007.05.07)
PCI FW Revision Status
Slot
00 1.22.01.00-IR Enabled
Ins/Del = Alter Boot List
v6.16.00.00 (2007.05.07)
SAS1064E
00
04:00:00
1.22.01.00-IR
500E0101:23456712
2B.00
Enabled
0
(Enabled BIOS & OS)
v6.16.00.00 (2007.05.07)
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 10 disks.
ALL DATA on array disks will be DELETED!
Boot
Order
0
Chapter 5: RAID configuration